Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on the Nissan Juke

Model: Nissan Juke MK 1 - Years 2010-2019
Part: Service warning light

Here are the steps to reset the service light for the regular maintenance oil change on the Nissan Juke. First, get into the vehicle and press and hold both buttons on the instrument cluster simultaneously; then turn the ignition to position one while holding the buttons. At this point, wait for the maintenance kilometres to be reset, consequently clearing the service light, following the video tutorial to the end!

Updated on 26 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Nissan Juke (2010-2019 / MK 1) The following video tutorial shows how to reset the service light on a Nissan Juke independently. If the light does not reset, a visit to the garage …
Nissan Juke (2010-2019 / MK 1) Today, you will see how to reset the service light related to the car service on a 2018 Nissan Juke. To start the reset procedure, turn on the igniti…
Nissan Juke (2010-2019 / MK 1) In the Nissan Juke, the service light must be reset manually once the service is completed. To do this, follow the procedure shown in the attached vi…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos