Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the window regulator in the Nissan Qashqai?

Model: Nissan Qashqai J10 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Side window

See other generations:
Video tutorial

In this tutorial, you can see how to replace the front window regulator in the Nissan Qashqai. This is a very simple operation but requires the prior removal of the door panel.

Once done, undo all the fastening bolts of the central plate with a 10mm socket, disconnect the power connector by unlocking the respective clip, and proceed to remove the bolt located at the top. At this point, remove the lock module, take out the last bolt, and separate the entire window regulator from the door.

To fit the replacement, simply follow the reverse procedure.


Updated on 15 July 2026 by ScegliAuto


Related tutorials

How to replace the window regulator of the Nissan Qashqai J10
How to replace the window regulator of the Nissan Qashqai J10
Nissan Qashqai (2006-2014 / J10) Let's see how to replace the window lifter of the Nissan Qashqai J10: unfortunately, the problem arises from the fact that from the driver's control …
How do you remove the door panel of the Nissan Qashqai?
How do you remove the door panel of the Nissan Qashqai?
Nissan Qashqai (2014-2022 / J11) Unfortunately, in most cases, when the work described in the subject is necessary, it means having to repair damage caused by an impact. Let's watch …
How to Remove the Timing Belt from a Nissan Qashqai
How to Remove the Timing Belt from a Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) Before starting, lift your Nissan Qashqai. Begin by removing the front wheel and the inner wheel arch by unscrewing the relevant bolts and clips. Nex…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos