Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Qashqai
    4. : When should the fuel filter of Nissan Qashqai be changed?

Nissan Qashqai - Video tutorial

Model: Nissan Qashqai J10 - Years 2006-2014
Part: Diesel filter
Operation: When should the fuel filter of Nissan Qashqai be changed?

As shown in the video, the fuel filter of the Nissan Qashqai must be changed after at least 6 years of use or every 60,000 km. To proceed with the replacement of the filter, you must remove the filter itself by unscrewing the 3 bolts and removing the protective cover. Disconnect the connectors and the two tubes, unscrew the bolt located at the bottom to keep the fuel filter in position. Lift and remove the now depleted fuel filter. Insert the new one that you have previously purchased into the housing and repeat all the operations in reverse.


Posted on 3 May 2023 by ScegliAuto

    Frequently Asked Questions

    • Qashqai 2006-2014 - How much does it cost to replace the diesel filter in the Nissan Qashqai 1.5 DCI? Read Answer
    • Qashqai 2006-2014 - How much does the diesel filter cost in the Nissan Qashqai? Read Answer
    • Qashqai 2014-2022 - Why did the lamp showing an ampoule come on in the Nissan Qashqai? Read Answer
    • Qashqai 2014-2022 - Diesel filter lease on Nissan Qashqai? Read Answer
    • Qashqai 2006-2014 - Where is the Nissan Qashqai diesel filter located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos