Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Nissan
  4. :
  5. Altima
  6. : Replace the sun visor of the Nissan Altima.

Nissan Altima - Video tutorial

Model: Nissan Altima L32 - Years 2007-2012
Operation: Replace the sun visor of the Nissan Altima.

To change the sun visor of the Nissan Altima, we must start with the cap that hides the screw, which we can remove with a knife blade or a plastic spatula to ensure that no surface is damaged. The entire visor is held on by only one screw, so it is sufficient to remove that with a Phillips head screwdriver or an electric screwdriver and the job is practically done. At this point, all that remains is to gently but firmly remove the visor from its housing. From there, we need only do the reverse to install the new one.


Posted on 25 May 2023 by ScegliAuto



How to replace the sun visor of the Nissan Altima
Nissan Altima (2013-2018 / L33) Let's find out, in this short and simple guide, how to disassemble and replace the sun visor of the Nissan Altima, following the instructions below.
Where is the fuse box located in the 2004 Nissan Altima?
Nissan Altima (2002-2006 / L31) If you have not been able to find the box that contains all the various fuses of your 2004 Nissan Altima, do not worry because we will give you all t
Where is the fuse box located in the Nissan Altima?
Nissan Altima (2013-2018 / L33) In this new mini guide, we will discover where the fuse box is located inside your Nissan Altima (year 2013-2018). Before proceeding, however, you mu

    Frequently Asked Questions

    • Altima 2013-2018 - What to do when there is a problem with the exterior temperature gauge on your Nissan Altima? Read Answer
    • Altima 2018-2023 - What are the Nissan Altima acceleration hesitation problems? Read Answer
    • Altima 2018-2023 - What problems can occur with the oil pump in a Nissan Altima? Read Answer
    • Altima 2018-2023 - What problems with the fuel gauge on the Nissan Altima? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos