Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Air Filter on the Nissan Qashqai

Model: Nissan Qashqai J11 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Air filter

See other generations:
Video tutorial

To ensure the engine breathes properly and to keep fuel consumption down, replace the air filter as per the maintenance schedule, or sooner if driving on particularly dusty roads. Open the bonnet and remove the intake duct section from the filter box, disconnect the two retaining springs on either side of the box, and take off the cover.

You can now remove the old filter element and replace it with a new one, ensuring the edge fits snugly in place. Refit the cover and secure it with the springs, then position the intake duct back in its housing.


Updated on 1 August 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter on a Nissan Qashqai?
How to Replace the Cabin Air Filter on a Nissan Qashqai?
Nissan Qashqai (2006-2014 / J10) Before starting, enter the cabin of your Nissan Qashqai. Begin by unclipping and removing the cover located at the lower left of the centre tunnel ne…
Replacing the Cabin Air Filter on the Nissan Qashqai J11
Replacing the Cabin Air Filter on the Nissan Qashqai J11
Nissan Qashqai (2014-2022 / J11) This guide explains the procedure to remove and replace the cabin air filter on the Nissan Qashqai J11, second series, in simple steps. First, get in…
Replacement of the Cabin Air Filter of the Nissan Qashqai
Replacement of the Cabin Air Filter of the Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) The instructions in this guide will illustrate how to disassemble and replace the cabin air filter of the Nissan Qashqai. First, open the passenger s…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos