Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Micra
    4. : How to replace the front wiper blade.

Nissan Micra - Video tutorial

Model: Nissan Micra K12 - Years 2002-2010
Part: Windscreen wipers
Operation: How to replace the front wiper blade.

Take the wiper and lift it from its position on the windshield. Rotate the brush interlocking lever to release it from its position. Move the blade down along the wiper rod and remove the blade. Take the new brush and place it in its housing by lifting the fixing lever. Once in place, close the retaining lever to lock it into the housing and lower the wiper towards the windshield. The replacement is done. The car that is being serviced in the pictures is a Nissan Micra.


Posted on 8 September 2023 by ScegliAuto



How to replace the front windshield wipers of the Nissan Micra.
Nissan Micra (2010-2017 / K13) Today we will see the guide that will allow us to disassemble and replace the front windshield wipers (but it also applies to the rear one) of the Ni
How to replace the rear windshield wiper of the Nissan Micra
Nissan Micra (2010-2017 / K13) In today's article, we will show you how to replace the windshield wiper blade of the Nissan Micra 3rd series. The procedure takes less than 1 minute
How to replace Nissan Micra front wipers
Nissan Micra (2002-2010 / K12) If we need to replace the front wiper blades of the car we can follow the simple instructions below and also help us with the images in the video. Li

    Frequently Asked Questions

    • Micra 2002-2010 - Why are the wipers on Nissan Micra not working? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos