Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Nissan Navara D23

Model: Nissan Navara D23 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Warning light – error code

See other generations:
Video tutorial

In this video, you will see how to reset the service light on a Nissan Navara D23, specifically the version produced in 2017. This is a very simple operation, as after turning on the instrument panel (without starting the engine), you need to operate the button/dial located on the left side of the speedometer by pressing it. Then, turn off the ignition.

Turn it back on while holding this button; this will turn off the service light within a few seconds.

To verify that the operation was successful, turn off the ignition and turn it back on: the light should be off.


Updated on 3 September 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Nissan Navara D23
How to Reset the Service Light on a Nissan Navara D23
Nissan Navara (2014-2024 / D23) .. In this video, we will see how to reset the service light on a Nissan Navara D23. First, ensure that all doors, the boot, and the.. …
Where is the OBD2 Port on the Nissan Navara D23?
Where is the OBD2 Port on the Nissan Navara D23?
Nissan Navara (2014-2024 / D23) Knowing the exact location of the OBD2 port on your Nissan Navara D23 is very important as it allows you to easily connect any compatible diagnostic …
Resetting the Service Light on the Nissan Navara D23
Resetting the Service Light on the Nissan Navara D23
Nissan Navara (2014-2024 / D23) In this video, see how to reset the system that alerts you to the need for a service on the Nissan Navara D23. Sit in the driver's seat, turn on the …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos