Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the External Rear-View Mirror on the Nissan Qashqai

Model: Nissan Qashqai J10 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Side mirror

See other generations:
Video tutorial

To remove the external rear-view mirror fixed to the door, start by removing the internal door trim panel. Take off the handle cover, unscrew the screws underneath, and remove the handle support that also acts as a frame for the opening lever.

Then, unclip the window switch and unclip the pressure clips along the edge. At this point, remove the triangular plastic trim applied directly at the mirror's location, disconnect the connector, and unscrew the three fixing screws of the mirror itself.


Updated on 22 February 2026 by ScegliAuto


Related tutorials

How to Change the External Wing Mirror on a Nissan Qashqai
How to Change the External Wing Mirror on a Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) How to change the external mirror if damaged? Let's see how to remove the mirror from inside the external casing. Pry between the perimeter of the mi…
How to Replace the Wing Mirror Cover on the Nissan Qashqai
How to Replace the Wing Mirror Cover on the Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) Today, you will learn how to replace the outer wing mirror cover on the Nissan Qashqai model J10. The first step in replacing the outer mirror is to …
How to Remove the Interior Rear-View Mirror from a Nissan Qashqai
How to Remove the Interior Rear-View Mirror from a Nissan Qashqai
Nissan Qashqai (2021-2026 / J12) Today, you will see in this brief and simple guide how to disassemble and remove the interior rear-view mirror from a Nissan Qashqai by following the…

Other guides you may be interested in

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos