Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Service Light on the Nissan NP 300

Model: Nissan Np300 D23 - Years 2014-2024
Part: Service warning light

As the mileage approaches the scheduled oil change for the Nissan NP 300, a warning appears on the instrument panel to remind you to perform this important task. Once you have completed the oil change, reset the notification system. Sit in the driver's seat, turn the ignition key to the 'on' position, press and hold the button located at the bottom right of the odometer for five seconds. After this time, release it and press it briefly again, turn off the ignition, and upon the next restart, you will have confirmation of the reset.

Updated on 11 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Service light on the Nissan NP300?
How do you reset the Service light on the Nissan NP300?
Nissan Np300 (1997-2022 / D22) In order to reset the Service light of the Nissan NP300, you need to insert the ignition key into the corresponding slot, so that you can turn on the…
How to restore the service of the Nissan NP300
How to restore the service of the Nissan NP300
Nissan Np300 (2014-2024 / D23) In today's article, we will show you how to reset the maintenance light on the Nissan NP300. This operation will take less than 1 minute to complete …
How to reset the service light on the Nissan NP300 pick-up?
How to reset the service light on the Nissan NP300 pick-up?
Nissan Np300 (2014-2024 / D23) In this tutorial we can see how to reset the service in the Nissan NP300 pick-up, an extremely simple and quick operation, to be carried out only onc…

Other guides you may be interested in

How to replace the horn on a Renault Duster - Dacia Duster

Today's main instructions will show you the procedure for removing and replacing the horn or sound signal on the Renault Duster, as well as the Dacia Duster. First, open the bonnet of the vehicle and start removing the front bumper by unscrewing all the fixing screws; you will find the horn right in front of the radiator, as shown in the video. At this point, disconnect the electrical connector and unscrew the bracket screw to remove and replace the horn with the new one; finally, reassemble the front bumper!

Watch the video!


by ScegliAuto

More videos