Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Diesel Filter on the Nissan Juke 1.5 DCI

Model: Nissan Juke MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Diesel fuel filter

See other generations:
Video tutorial

The main steps today will show you how to remove and replace the diesel filter on the Nissan Juke 1.5 DCI. First, open the bonnet of the vehicle and locate the diesel filter, situated at the rear of the engine compartment; then, undo the nuts of the mounting bracket and disconnect the fuel lines from the filter and the electrical connector located above, as shown in the video.

At this point, install the new original diesel filter, reconnecting everything, following the video tutorial until the end!


Updated on 19 September 2026 by ScegliAuto


Related tutorials

How to Replace the Diesel Filter in the Nissan Juke
How to Replace the Diesel Filter in the Nissan Juke
Nissan Juke (2010-2019 / MK 1) In today's video, you will see how to independently replace the diesel filter in the Nissan Juke 1.5 dCi. First, allow the vehicle to cool down, then…
How to replace the diesel filter of the 2015 Nissan Juke
How to replace the diesel filter of the 2015 Nissan Juke
Nissan Juke (2010-2019 / MK 1) Today we will explain how to replace the diesel filter of the 2015 Nissan Juke. We open the front hood of the car and remove the plastic undertray ab…
How do you replace the fuel filter in the Nissan Juke 1.5 dci?
How do you replace the fuel filter in the Nissan Juke 1.5 dci?
Nissan Juke (2010-2019 / MK 1) The fuel filter, in this specific case diesel, is among the scheduled maintenance operations, indicated to the driver of the vehicle by means of the …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos