Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Rear Brake Light Bulb on a Nissan Juke

Model: Nissan Juke MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Tail light bulb

See other generations:
Video tutorial

This is a quick and simple task that will save you money and time by following this quick tutorial. Open the boot and unscrew the two bolts located beside the light along the edge of the boot.

Now, using a plastic lever, lift the light by inserting the lever into the gap between the light and the boot opening. Simply rotate the bulb holders to remove them from their position and obtain the light without the bulbs.

Now replace the faulty bulbs and reposition everything by following the steps in reverse.


Updated on 23 February 2026 by ScegliAuto


Related tutorials

How to disassemble the rear lights in the Nissan Juke?
How to disassemble the rear lights in the Nissan Juke?
Nissan Juke (2010-2019 / MK 1) In this tutorial we can see how to disassemble the rear lights in the Nissan Juke, an extremely simple and quick operation. First of all, make sure t…
How to Replace the Headlamp Bulb on a Nissan Juke
How to Replace the Headlamp Bulb on a Nissan Juke
Nissan Juke (2010-2019 / MK 1) To replace the headlamp bulb on a Nissan Juke, open the bonnet to access the components inside the engine bay. You need to disconnect the air duct to…
How to change the headlight bulb of the Nissan Juke MK1
How to change the headlight bulb of the Nissan Juke MK1
Nissan Juke (2010-2019 / MK 1) In this video we see how to change the headlight bulb of the Nissan Juke MK1: we open the hood, and we can see that there is enough space inside the …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos