Do it yourself
| ||||
|
Nissan Qashqai - Video tutorial
Model: Nissan Qashqai
J10
- Years 2006-2014 The service reset on a first-generation Nissan Qashqai (2007-2013) can be manually performed by following these steps: **Important note:** Before proceeding, make sure that it is the actual time for the service reset, as an early reset could result in missed vehicle maintenance. It is recommended to follow the owner's manual instructions or consult a qualified mechanic to verify if it is the appropriate time to perform the service reset. 1. Turn on the car: Start the car and make sure that the display of the multimedia control unit (radio/infotainment) shows the clock or any other useful information. 2. Access the service reset mode: Use the buttons on the central console (usually near the screen or below it) to scroll through the menus until you find the service screen or maintenance indicator. 3. Select the reset: Once you have located the service screen or maintenance indicator, press and hold the reset button (it could be a small button labeled "Reset" or "OK" near the screen). 4. Confirm the reset: After holding down the reset button, the display may ask you to confirm the reset procedure. Follow the instructions displayed on the screen and confirm the reset. 5. Complete the reset: Once the reset is confirmed, the display should show a warning message that the service has been reset or that the maintenance indicator has been reset. 6. Turn off and restart the car: Turn off the car and then restart it to ensure that the service reset has been performed correctly. Check the multimedia control system screen again to verify that the maintenance indicator has disappeared. **Note:** The instructions provided above are general and may vary slightly depending on the version and specifications of the multimedia control system present on your first-generation Nissan Qashqai. If you have doubts or difficulties in the process, consult the vehicle owner's manual or seek assistance from a Nissan dealer or a qualified mechanic.
Posted on 26 March 2024 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsHow to replace the Ford Transit key batteryBelow I will explain how to replace the remote control key battery on the car, take a small screwdriver and pry the rear part of the remote control, (where there is the ring), at which point unhook the back cover and yes will have access to the compartment containing the battery. Always with the help of the small screwdriver, proceed to make the va and lift the battery out of the housing. Then take the new battery (check the type) and place it on the housing, always making sure to position it with the positive pole facing upwards. Finally, close the back cover by re-hooking it to the key. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.021
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |