Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the heater fan resistor of the Nissan Micra K11

Model: Nissan Micra K11 - Years 1992-2002
Part: Blower motor

In this video we see how to replace the cabin fan resistor on a Nissan Micra K11: in fact, the fan only works at maximum speed. It is a simple and inexpensive operation. The resistor is located under the glove compartment, in the large black cylinder we have the fan motor, and behind it is the electrical connector of the resistor, which is held in place by two bolts that we will need to remove. Once this operation is done, we remove the resistor from the electrical socket, using a flat head screwdriver. We can find the new resistor for example on fruugo. It, with article code 2715072B01 and priced at 12.95 euros + 5.99 euros for shipping. Simply reconnect it to its connector and reposition it with the bolts we had set aside. Now the work is finished and the fan works at all four speeds.

Posted on 3 June 2024 by ScegliAuto

Video tutorial

Related tutorials

Where is the heating resistor located in the Nissan Micra?
Where is the heating resistor located in the Nissan Micra?
Nissan Micra (2002-2010 / K12) In this video we can see where the heating resistor is located in the Nissan Micra and how to proceed in case we need to replace it, an extremely sim…
How to Replace the Cabin Fan Resistor on the Nissan Micra?
How to Replace the Cabin Fan Resistor on the Nissan Micra?
Nissan Micra (2002-2010 / K12) To replace the cabin fan resistor on the Nissan Micra, remove the panel located directly under the steering column. The panel should simply be unclip…
How do you remove the heating fan in the Nissan Micra?
How do you remove the heating fan in the Nissan Micra?
Nissan Micra (2002-2010 / K12) This video guide aims to show the correct steps to disassemble the heating fan, referring to various Nissan cars and not just the Nissan Micra. Here …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos