Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Door Panel on a Nissan Juke

Model: Nissan Juke MK 1 - Years 2010-2019
Part: Door trim panel

Open the door that requires replacement. Now, gently pull out the triangular panel corresponding to the wing mirror. Remove the cover that conceals the screw to be removed from the small storage compartment in the centre of the armrest. Then, using a plastic lever, lift the storage compartment and remove it. Now, begin to gently pull the panel towards you, starting from one corner and proceeding along the entire edge. Disconnect the cables and connectors at the back, then retrace the steps described for reassembly.

Updated on 25 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the High-Pressure Fuel Pump on the Nissan Juke
How to Replace the High-Pressure Fuel Pump on the Nissan Juke
Nissan Juke (2010-2019 / MK 1) This guide will illustrate the steps to remove and replace the high-pressure fuel pump on the Nissan Juke. First, open the bonnet of the vehicle and …
How to Replace Fuses on a Nissan Juke
How to Replace Fuses on a Nissan Juke
Nissan Juke (2010-2019 / MK 1) Want to open the fuse box and replace the fuses? Learn how to replace the fuses on a Nissan Juke. Use a plastic lever to remove the covering in the g…
How to Replace the Cabin Fan on the Nissan Juke
How to Replace the Cabin Fan on the Nissan Juke
Nissan Juke (2010-2019 / MK 1) This guide outlines the main instructions on how to remove and replace the cabin fan on the Nissan Juke. First, open the driver's side front door and…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos