Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light on a Nissan Sentra?

Model: Nissan Sentra B17, MK 7 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Tail light

See other generations:
Video tutorial

In this tutorial, you will see how to remove the rear light on a Nissan Sentra, a very simple and quick operation. First, ensure the key is not in the ignition for safety.

Then, open the trunk, remove the three plastic rivets located at the back of the light assembly, and separate the cover from the side panel. Next, disconnect the power connector, loosen the mounting nuts with a 10mm socket wrench, and detach the light from the body.

To install the replacement, simply follow the reverse procedure.


Updated on 11 October 2026 by ScegliAuto


Related tutorials

How to replace the front headlight of the Nissan Sentra.
How to replace the front headlight of the Nissan Sentra.
Nissan Sentra (2007-2012 / MK 6, B16) The instructions in this guide will show us how to disassemble and replace the front headlight of the Nissan Sentra. First, let's open the hood of th…
How to replace the headlight bulb of the Nissan Sentra
How to replace the headlight bulb of the Nissan Sentra
Nissan Sentra (2012-2022 / B17, MK 7) Today we will show you the steps to replace the rear headlight bulb of the Nissan Sentra. To perform the replacement, we need to open the trunk and r…
How to Replace the Low Beam Bulbs in a Nissan Sentra?
How to Replace the Low Beam Bulbs in a Nissan Sentra?
Nissan Sentra (2012-2022 / B17, MK 7) Replacing the low beam bulbs in a Nissan Sentra is an extremely simple and quick task. Let's see how to proceed in this tutorial. Before doing this, …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos