Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Fan of the Nissan

Model: Nissan Nissan Various
Part: Blower motor

To carry out this operation, first locate the motor to be replaced, which is situated behind the glove compartment in front of the front passenger seat. To remove it, unclip it from the bottom, and once unclipped, disconnect the plugs at the back. Then, remove the screws located at the top and bottom of the back of the compartment to gain access to the motor. Unscrew the bolts securing it and disconnect the plugs supplying power to it. Retrace the steps described in reverse for reassembly.

Updated on 26 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Fan on a Nissan Sentra?
How to Replace the Cabin Fan on a Nissan Sentra?
Nissan Nissan Various To replace the cabin fan on a Nissan Sentra, open the glove compartment located on the passenger side and remove it completely to access the rear. On…
How to Remove and Clean the Cabin Fan on a Nissan Versa?
How to Remove and Clean the Cabin Fan on a Nissan Versa?
Nissan Nissan Various To remove the cabin fan on a Nissan Versa, go inside the cabin and pull out the glove compartment by removing the securing screws. In the glove compa…
Where is the fuse box of the Nissan Tsuru 3 located?
Where is the fuse box of the Nissan Tsuru 3 located?
Nissan Nissan Various The Nissan Tsuru model 3 has two fuse boxes inside. The first fuse box is located inside the cabin, specifically behind the driver's side glove compa…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos