|
Do it yourself
| |||
| ||||
How to Replace the Rear Light Bulb of the Opel Astra J 2010
Model: Vauxhall Astra
Astra J
- Years:
2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Video tutorial
If you need to replace the rear light bulb of your 2010 Opel Astra J but don't know how, read the following guide carefully and follow the described procedure. First, safely park your Opel Astra J, then turn it off completely and go outside. Next, reach the back of the car and lift the boot. Immediately locate the small compartment on the side of the boot and remove the protective cover. Unscrew the screws present and then proceed to remove the light unit. Finally, replace the faulty bulb with a new one.
Updated on 19 October 2026 by ScegliAuto
Related tutorials
Vauxhall Astra
(2004-2010 /
Astra H)
Replacing the left rear headlight bulb on the Opel Astra H is a straightforward task that you can do yourself, thanks to our short video tutorial. Th…
Vauxhall Astra
(2015-2022 /
Astra K)
Below we will see the instructions that will allow us to disassemble and replace the bulbs of the rear headlight of the Opel Astra. First, open the r…
Vauxhall Astra
(2009-2016 /
Astra J)
To replace the rear headlamp bulb on an Opel Astra, open the boot to access the side of the boot corresponding to the bulb that needs replacing. Deta…
Other guides you may be interested in |
How to Reset the AdBlue Warning Light on a Peugeot Boxer
To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.019
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |