Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Headlight Bulb on the Opel Astra H

Model: Vauxhall Astra Astra H - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Tail light bulb

See other generations:
Video tutorial

Replacing the left rear headlight bulb on the Opel Astra H is a straightforward task that you can do yourself, thanks to our short video tutorial. The first step is to open the boot and then open the cover located near the headlight, followed by disconnecting the connector.

The second step is to remove the two nuts securing the left headlight using a screwdriver. Then, push the headlight outwards and remove it. The third step is to unclip the cover of the light unit and then remove the headlight bulb and insert a new one. Finally, refit the headlight.

If necessary, perform the same operation for the right rear headlight.


Updated on 1 October 2026 by ScegliAuto


Related tutorials

How to replace the rear headlight bulb of the Opel Astra K
How to replace the rear headlight bulb of the Opel Astra K
Vauxhall Astra (2015-2022 / Astra K) Today we will explain how to replace the rear headlight bulb of an Opel Astra model K car. To replace the bulb, we need to open the trunk and remove …
Replacement of the rear headlight bulb of the Opel Astra.
Replacement of the rear headlight bulb of the Opel Astra.
Vauxhall Astra (2015-2022 / Astra K) Below we will see the instructions that will allow us to disassemble and replace the bulbs of the rear headlight of the Opel Astra. First, open the r…
Replacement of the rear headlight bulbs of the Opel Astra
Replacement of the rear headlight bulbs of the Opel Astra
Vauxhall Astra (2004-2010 / Astra H) The following instructions will allow us to disassemble and replace the bulbs of the rear light of the Opel Astra. First, we open the rear tailgate o…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos