Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to enter the radio unlock code in the Opel Vivaro van?

Model: Vauxhall Vivaro MK 1 - Years 2001-2014
Part: Warning light – error code

In this tutorial we can see how to enter the unlock code for the radio in the Opel Vivaro van, a very simple and quick operation, to be carried out for example after disconnecting the battery or following a reset. The code can be found in the documents provided at the time of purchase but, in case of loss, it can be recovered through one of the various online services. Once obtained, go inside the cabin, then turn on the instrument panel and hold down both the system power button and the "AS" button. Finally, enter the four digits using the "1", "2", "3" and "4" buttons, and then save by holding down the "AS" button again.

Posted on 2 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to enter the radio unlock code for an Opel Vivaro vehicle
How to enter the radio unlock code for an Opel Vivaro vehicle
Vauxhall Vivaro (2014-2019 / MK 2) The car radio locks when the battery is replaced; to unlock it, you will need to enter the unlock code. Entering the radio unlock code on an Opel Viv…
How to enter the unlock code for the Opel Vivaro car radio
How to enter the unlock code for the Opel Vivaro car radio
Vauxhall Vivaro (2001-2014 / MK 1) Enter the radio unlock code on an Opel Vivaro vehicle, following the same steps used to unlock the Renault Trafic car radio. This operation, very sim…
How to Enter the Unlock Code for the Radio in an Opel Vivaro?
How to Enter the Unlock Code for the Radio in an Opel Vivaro?
Vauxhall Vivaro (2001-2014 / MK 1) In this tutorial, you will learn how to enter the unlock code for the radio in an Opel Vivaro van, a necessary operation after disconnecting or repla…

    Frequently Asked Questions

    • Vivaro 2014-2019 - Where to find the radio code of the Opel Vivaro? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos