Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remove the Rear Door Panel on an Opel Zafira

Model: Vauxhall Zafira Zafira C, MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Door trim panel

See other generations:
Video tutorial

How to remove the left rear door panel of an Opel Zafira? Follow this video to proceed. Before starting the disassembly, disconnect the battery terminals located in the engine compartment.

Begin disassembly: remove the plastic cover under the door handle using a lever, then use a screwdriver to unscrew the securing screws on the plastic panel. Once all screws are removed, detach the plastic clips that secure the door.

Remove the door panel by hand, disconnect the power terminals and release cable. Perform necessary maintenance on the door by peeling off the adhesive protection.


Updated on 28 February 2026 by ScegliAuto


Related tutorials

How to Remove the Window Switch Button on an Opel Zafira
How to Remove the Window Switch Button on an Opel Zafira
Vauxhall Zafira (1999-2005 / Zafira A, T98, MK 1) How to remove the window switch buttons located on the passenger side panel of an Opel Zafira? This video explains the procedure. Before starting the…
Disassembly of the door panel of the Opel Zafira
Disassembly of the door panel of the Opel Zafira
Vauxhall Zafira (2011-2019 / Zafira C, MK 3) The steps illustrated in this guide will show us how to disassemble and remove the door panel of the Opel Zafira. First, we open the vehicle door and…
How to Dismantle the Front Door Panel of an Opel Zafira
How to Dismantle the Front Door Panel of an Opel Zafira
Vauxhall Zafira (2005-2011 / MK 2, A05, Zafira B) Begin dismantling the front door panel of an Opel Zafira. First, disconnect the battery terminals located in the engine bay, then use a screwdriver t…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos