|
Do it yourself
| |||
| ||||
How to reset the coolant level warning light on the Opel/Vauxhall Insignia MK1
Model: Vauxhall Insigna
MK 1, Insigna A
- Years:
2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Video tutorial
In this video we can see how to correct the error message on the dashboard of the Opel/Vauxhall Insignia MK1: inside the engine compartment, the coolant container is located right under the windshield wiper, on the right side, looking at the car from the front. In reality, the level is not low, so the problem is actually the container, where the sensor has corroded. We can find the new piece for example on eBay with the code 324500625840 at the price of 38,00 euros, with free delivery. There are two tubes connected to the container, and we will have to disconnect them, then we will have to remove safety clips that connect the container to the suspension strut; we remove the electrical connector underneath, and try not to spill too much fluid inside the engine compartment! Now we reconnect the delivery tubes, reconnect the electrical connector and put the safety clip back on the suspension strut; fill it with the right fluid and the operation is completed. Now let's check that the warning light has turned off.
Posted on 5 January 2025 by ScegliAuto
Related tutorials
Vauxhall Insigna
(2017-2026 /
MK 2, Insigna B)
This guide provides the main instructions to reset the AdBlue warning light on the Opel Insignia. Before performing the reset, ensure you have topped…
Vauxhall Insigna
(2017-2026 /
MK 2, Insigna B)
Today's main steps will show you how to reset the AdBlue refill warning light of the Opel Insignia. Get into the vehicle and turn on the ignition; yo…
Vauxhall Insigna
(2008-2017 /
MK 1, Insigna A)
If you have recently changed the engine oil and filter on your Opel Insignia A, but the warning light remains illuminated on the dashboard, follow th…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Reset the Tire Pressure Light on a MG ZS?
On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.031
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
