Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the "Service" light on an Opel Corsa?

Model: Vauxhall Corsa Corsa D - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Service warning light

See other generations:
Video tutorial

To reset the "Service" light on an Opel Corsa, start by turning on the instrument panel without starting the engine. Use the button located under the instrument panel to access the onboard computer menu.

By pressing the button repeatedly, navigate through the various options until you find the one dedicated to maintenance or service intervals. Once in the correct menu, hold down the button for a few seconds until the option to reset the "Service" light appears.

Confirm by holding down the button again until the system notifies you that the reset has been completed successfully. At that point, the "Service" light will turn off, indicating that the vehicle has recorded the new maintenance interval.

After the reset, it is advisable to turn off and on the instrument panel to verify that the operation was successful. If the light remains on, carefully repeat the procedure to ensure that everything was done correctly.


Posted on 11 April 2025 by ScegliAuto


Related tutorials

Vauxhall Corsa (2019-2026 / Corsa F) To reset the "Service" light on an Opel Corsa, start by turning on the ignition without starting the engine. Use the buttons on the steering wheel to…
Vauxhall Corsa (2000-2006 / Corsa C) To reset the "Service" light on an Opel Corsa, start with the ignition off. Press the button located under the instrument panel, near the odometer di…
Vauxhall Corsa (2006-2014 / Corsa D) Before starting, sit in the driver's seat of your Opel Corsa. Begin by locking and unlocking the car using the electric key. Then, open and close the…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos