Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the external handle of the Opel Corsa D version

Model: Vauxhall Corsa Corsa D - Years 2006-2014
Part: Handle

In this video, we will see how to remove the external handle of the Opel Corsa version D, and the method is the same for both the front and rear doors. In the thickness of the door, at the height of the handle, we find a small hole, covered by a rubber cap, where we will insert a torx 15 screwdriver to remove the screw inside. While doing this, hold the external handle with your hand, keeping it open. Once the screw is removed, we can remove the fixed part, and consequently also the mobile part, by sliding it out as shown in the video. To put the new one back, we will insert the outer part into its housing and then close it and slide it outwards. Open the door and put the fixed part back in place, closing the screw on the thickness side. Put the rubber cap back in place and it's done.

Posted on 28 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the External Door Handle of the Opel Corsa
How to Remove the External Door Handle of the Opel Corsa
Vauxhall Corsa (2014-2019 / Corsa E) Here are the main instructions for removing and replacing the external door handle of the Opel Corsa. First, open the front door and start unscrewing…
Replacement of the external door handle of the Opel Corsa
Replacement of the external door handle of the Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) In this guide, we will see the instructions that will allow us to disassemble and replace the external handle of the door of the Opel Corsa. First, w…
Removing the Handle from Inside the Door of an Opel Corsa
Removing the Handle from Inside the Door of an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Do you want to remove the external handle of the Opel Corsa? Open the car door and locate where and how to remove the external handle. Remove the cov…

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos