Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Bulbs on an Opel Corsa

Model: Vauxhall Corsa Corsa D - Years 2006-2014
Part: Headlight bulb

Here’s how to replace the bulbs on an Opel Corsa: open the bonnet by pulling the lever located at the bottom right of the dashboard and secure it. Once you locate the inspection cap of the headlight (located at the rear of the headlight), remove it; you will find the bulbs with metal clips, pull the bulb holders out of the headlight and extract the damaged bulb using a screwdriver. Fit the new bulb (ensuring it is the correct type and size) and insert the bulb holder back into the headlight housing. Finally, refit the inspection caps. Test the correct functioning of the lights.

Updated on 3 March 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Replace Front Headlight Bulbs on Opel Corsa
Replace Front Headlight Bulbs on Opel Corsa
Vauxhall Corsa (2000-2006 / Corsa C) Are the bulbs in your Opel Corsa blown and need replacing? Here’s how to change them in the front headlight. Open the front bonnet by pulling the lev…
How to Replace the Front Headlamp Bulbs on an Opel Corsa
How to Replace the Front Headlamp Bulbs on an Opel Corsa
Vauxhall Corsa (2014-2019 / Corsa E) Learn how to replace the front headlamp bulbs on an Opel Corsa. Release the front bonnet by pulling the lever located at the bottom right of the dash…
How to Replace the Rear Headlight Bulbs on an Opel Corsa
How to Replace the Rear Headlight Bulbs on an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Are the bulbs in the rear headlight of your Opel Corsa no longer working? Learn how to replace the rear headlight bulbs. Open the boot lid, then remo…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos