Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to activate the service mode of the handbrake of the Opel/Vauxhall Astra K.

Model: Vauxhall Astra Astra K - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Parking brake

See other generations:
Video tutorial

In this video we can see how to activate the service mode of the handbrake of the Opel/Vauxhall Astra K, as it is necessary to retract the calipers in order to replace the rear brakes: first of all, we turn on the instrument panel, then we put the gear in "neutral" and press the brake pedal all the way down, then we press and hold the handbrake button until the service mode message appears on the display and at the same time the handbrake light starts flashing.

We can release the button, we hear the calipers retracting and the service mode light illuminates.

To return them to their original position, just press the button again.


Posted on 29 May 2025 by ScegliAuto


Related tutorials

How to Replace the Handbrake Gaiter on the Vauxhall Astra?
How to Replace the Handbrake Gaiter on the Vauxhall Astra?
Vauxhall Astra (1998-2006 / Astra G) To replace the handbrake gaiter on the Vauxhall Astra, first remove the small plastic panel located at the front of the handbrake itself. Once this i…
How to Replace the Handbrake Cable on the Opel Astra H
How to Replace the Handbrake Cable on the Opel Astra H
Vauxhall Astra (2004-2010 / Astra H) Follow these main instructions to replace the handbrake cable on the Opel Astra H. First, disconnect the wiring from the rear brakes by lifting the v…
How to put the parking brake in service mode on the Opel Astra K
How to put the parking brake in service mode on the Opel Astra K
Vauxhall Astra (2015-2022 / Astra K) In this video, we will see how to put the parking brake in service mode on the Opel Astra K: this mode is useful in case we need to change the brake …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos