|
Do it yourself
| |||
| ||||
How to put the parking brake in service mode on the Opel Astra K
Model: Vauxhall Astra
Astra K
- Years:
2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Video tutorial
In this video, we will see how to put the parking brake in service mode on the Opel Astra K: this mode is useful in case we need to change the brake pads or discs on the rear brakes. Put the gear in neutral or "P", then turn on the ignition, but without starting the engine, then press the brake pedal 5 or 6 times, until the brake servo is emptied, then press the brake pedal and the parking brake switch for about 15 seconds, until the orange service light starts flashing. Now continue to hold down the brake pedal and release and press the button for 5 seconds, before the orange service light goes out, then release everything. The service light starts flashing and the rear calipers retract. To exit service mode, we must press the brake pedal while pulling the brake button, until the orange light goes out and the pistons come out again.
Posted on 31 October 2025 by ScegliAuto
Related tutorials
Vauxhall Astra
(2015-2022 /
Astra K)
In this video we can see how to activate the service mode of the handbrake of the Opel/Vauxhall Astra K, as it is necessary to retract the calipers i…
Vauxhall Astra
(2009-2016 /
Astra J)
You can deactivate Eco Mode on the Opel Astra by first turning on the instrument cluster after inserting the ignition key into the corresponding barr…
Vauxhall Astra
(2004-2010 /
Astra H)
If you want to have access to the OBD port in your Opel Astra H, all you have to do is carefully read the following guide and follow the various step…
Other guides you may be interested in
|
How to Remove the Rear Seat of a Hyundai Tucson?
To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.052
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |