Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the bulbs in the instrument panel of the Opel Corsa

Model: Vauxhall Corsa Corsa D - Years 2006-2014
Part: Instrument panel light

These short and simple steps will show us how to disassemble and replace the bulbs of the instrument panel of the Opel Corsa. First, we get into the car and start disassembling and removing the instrument panel, unscrewing the fixing screws and disconnecting the electrical wiring at the back; then we separate the electrical part from the panel light, thus accessing the electronic board and the bulbs, as shown in the video. In this case, LED lights are installed, modifying them on the board; we replace the bulb bulbs with new ones, finally reassembling everything!

Posted on 15 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the bulbs in the instrument panel of the Opel Corsa
How to replace the bulbs in the instrument panel of the Opel Corsa
Vauxhall Corsa (1993-2000 / Corsa B) Today's instructions will show us how to disassemble and replace the bulbs of the instrument panel of the Opel Corsa, in simple steps. First, we get …
How do you replace the bulbs in the Opel Corsa C instrument cluster?
How do you replace the bulbs in the Opel Corsa C instrument cluster?
Vauxhall Corsa (2000-2006 / Corsa C) In order to replace the Opel Corsa C instrument cluster bulbs, you have to remove the plastic covers that wrap around the steering column. Once these…
Replace headlight bulbs on Opel corsa
Replace headlight bulbs on Opel corsa
Vauxhall Corsa (2000-2006 / Corsa C) Are the bulbs of the Opel Corsa burnt out and therefore need to be replaced? Let's see how we change in the headlight. We open the front hood by pull…

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos