Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the rear ABS sensor of the Opel Astra

Model: Vauxhall Astra Astra J - Years 2009-2016

Below we will see the instructions that will allow us to disassemble and replace the rear ABS sensor of the Opel Astra. First, we lift the vehicle and start to remove the rear wheel; we find the ABS sensor right behind the brake disc, as shown in the video. At this point, we disconnect the sensor by unscrewing the fixing screw of the cable, then replacing the ABS sensor with the new one; we correctly reassemble the sensor and finally the rear wheel, resetting any error (using a diagnostic tool) on the instrument panel.

Posted on 30 September 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacing the ABS Sensor on an Opel Astra
Replacing the ABS Sensor on an Opel Astra
Vauxhall Astra (2009-2016 / Astra J) Do you have a problem with the ABS sensor? Here’s how to replace the part located under the front wing. Raise the vehicle to a comfortable height for…
Replacing ABS on an Opel Astra
Replacing ABS on an Opel Astra
Vauxhall Astra (2004-2010 / Astra H) How to remove the ABS on an Opel Astra? Let's look at removing the part located inside the engine bay. Lift the front bonnet, disconnect the electric…
Replacing the Coolant Sensor on an Opel Astra
Replacing the Coolant Sensor on an Opel Astra
Vauxhall Astra (2009-2016 / Astra J) How do you remove the coolant sensor? Remove the coolant reservoir from the Opel Astra. Lift the bonnet to access the coolant reservoir. Unscrew the …

    Frequently Asked Questions

    • Astra 2004-2010 - Which fuse affects the starter of an Opel Astra H? Read answer
    • Astra 1998-2006 - Where is the speed sensor located in an Opel Astra G? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos