Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the license plate lights of the Opel Corsa

Model: Vauxhall Corsa Corsa D - Years 2006-2014
Part: License plate light

Today, we will see the steps that will allow us to disassemble and replace the license plate lights of the Opel Corsa. First, let's move to the rear part of the car and start by removing the plastic light cover of the license plate, using something thin and pointed to pry it off; then we remove the small bulb from the socket, as shown in the video. At this point, we install the new license plate bulb, of the correct type and with the same fitting; we reassemble the plastic cover and perform the same operation to replace the other license plate light!

Posted on 9 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Activate the On-Board Computer of an Opel Corsa
How to Activate the On-Board Computer of an Opel Corsa
Vauxhall Corsa (2019-2026 / Corsa F) Before you can begin, sit in the driver's seat of your Opel Corsa. Insert the key into the ignition barrel and turn it clockwise. Next, press the but…
How to replace the front headlight bulb of the Opel Corsa C
How to replace the front headlight bulb of the Opel Corsa C
Vauxhall Corsa (2000-2006 / Corsa C) Replacing the headlight bulb of the Opel Corsa model C requires a few minutes of your time and a few steps to follow. The steps to be followed for th…
Replacement of the cabin fan resistor of the Opel Corsa.
Replacement of the cabin fan resistor of the Opel Corsa.
Vauxhall Corsa (2006-2014 / Corsa D) Below we will see the information regarding the disassembly and replacement of the cabin fan resistor of the Opel Corsa. First, we open the front doo…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos