Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the license plate light of the Opel Corsa

Model: Vauxhall Corsa Corsa D - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: License plate light

See other generations:
Video tutorial

Just like all light bulbs, the license plate light can also burn out and therefore need replacement. To replace the license plate light on an Opel Corsa model D car, we need to use a small flathead screwdriver and slightly open the trunk.

Insert the screwdriver on the side of the internal button to release the light from its housing. Disconnect the connector and replace the bulb.

Insert the light back into its housing and proceed to replace the second bulb. Turn on the vehicle lights to test their operation.


Posted on 3 May 2025 by ScegliAuto


Related tutorials

Replacement of the license plate lights of the Opel Corsa
Replacement of the license plate lights of the Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Today, we will see the steps that will allow us to disassemble and replace the license plate lights of the Opel Corsa. First, let's move to the rear …
Change Number Plate Lights on Opel Corsa
Change Number Plate Lights on Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Let’s see how to remove the number plate bulbs on an Opel Corsa. Remove the number plate light unit to access the bulbs (located in the rear bumper o…
Instructions for Replacing the Number Plate Light
Instructions for Replacing the Number Plate Light
Vauxhall Corsa (2006-2014 / Corsa D) To replace the number plate light, first unclip the light unit from the trim positioned just above the number plate: simply press the side tab to ret…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos