Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Replacing the Number Plate Light

Model: Vauxhall Corsa Corsa D - Years 2006-2014
Part: License plate light

To replace the number plate light, first unclip the light unit from the trim positioned just above the number plate: simply press the side tab to retract it and remove the light unit itself; then unclip the power connector by lifting the locking tab, extract the bulb holder by rotating it 90 degrees anti-clockwise, and at this point, pull out the bulb (T5 fitting). Insert the new bulb, attach the bulb holder to the light unit, and then connect the power connector; check its operation and reposition the light unit in its housing, ensuring to insert the rear part first and then snap the front part into place by engaging the locking tab.

Updated on 11 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to Replacing the Timing Chain on the Opel Corsa 1.2
Guide to Replacing the Timing Chain on the Opel Corsa 1.2
Vauxhall Corsa (2000-2006 / Corsa C) In today's video, you will learn how to remove and replace the timing chain on the Opel Corsa 1.2 petrol. First, open the bonnet and start by removin…
Guide to Replacing the Timing Chain on the Opel Corsa 1.0
Guide to Replacing the Timing Chain on the Opel Corsa 1.0
Vauxhall Corsa (2006-2014 / Corsa D) The information below will assist you in the process of dismantling and replacing the timing chain on the Opel Corsa 1.0. The timing chain replacemen…
Guide to replacing the timing belt of the Opel Corsa
Guide to replacing the timing belt of the Opel Corsa
Vauxhall Corsa (2000-2006 / Corsa C) Today's main information will show us the process of disassembling and replacing the timing belt of the Opel Corsa. First, we lift the car and start …

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos