|
Do it yourself
| |||
| ||||
How to replace the brake light bulb on the Opel Corsa D
Model: Vauxhall Corsa
Corsa D
- Years 2006-2014
Let's see how to replace the bulb located in the rear light cluster of an Opel Corsa D, to change the brake light. First of all, we will need to remove the rear light cluster, by opening the tailgate, removing the internal cover panel, in the corner corresponding to the tail light. Behind it, we will find some fixing nuts, unscrew them and from the outside pull the light cluster away, which is held in place by guide pins; disconnect the electrical connector, and turning the light cluster we will see several black plastic bulb holders inserted in the body of the light cluster. Identify the one of our interest, unscrewing the bulb holder (and not directly the bulb) and replacing the bulb (which should not be touched with bare hands). Reassemble the bulb holder, reconnect the connector, reposition the light cluster, screw back the fixing nut, put back the cover panel and it's done.
Posted on 27 October 2025 by ScegliAuto
Video tutorial
Related tutorials
Vauxhall Corsa
(2000-2006 /
Corsa C)
Today, you will discover the steps that illustrate the procedure for removing and replacing the handbrake cable on the Opel Corsa. First, lift the ve…
Vauxhall Corsa
(2014-2019 /
Corsa E)
To replace the rear headlight bulb of an Opel Corsa, start by opening the rear hatch. Find the access panel inside the trunk, usually located behind …
Vauxhall Corsa
(2006-2014 /
Corsa D)
To replace the front headlight bulb on your Opel Corsa D, follow the instructions in this guide. The operation varies slightly depending on whether i…
Other guides you may be interested in
|
How to Reset the Central Locking of the Volkswagen Golf 4?
If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.334
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |