Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the remote control microchip from the Opel Insignia.

Model: Vauxhall Insigna Insigna A, MK 1 - Years 2008-2017
Part: Key

Today we will explain how to remove the microchip from the remote control of the Opel Insignia by yourself. To remove the microchip, we need to open the remote control into two parts. If we need to replace the microchip but keep the casing, we should open the remote control using a flathead screwdriver, which should be inserted along the left side of the remote itself. If the remote casing needs to be replaced, a pair of pliers can be used to open the two parts. Once the remote control is open, we carefully remove the microchip, taking care not to damage it, and place it inside the new casing; or we can perform the replacement by inserting it back into the same remote control.

Posted on 28 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the Opel Insignia remote control
How to replace the battery of the Opel Insignia remote control
Vauxhall Insigna (2017-2026 / MK 2, Insigna B) In short, we will discover the necessary instructions to open the key remote and replace its battery for the Opel Insignia. First, we take our remote…
How to replace the battery of the key remote control for the Opel Insignia
How to replace the battery of the key remote control for the Opel Insignia
Vauxhall Insigna (2008-2017 / Insigna A, MK 1) This video tutorial will show us how to disassemble and replace the battery of the key remote of the Opel Insigna, in simple and quick steps. First, …
How do you replace the key shell of the Opel Insignia?
Vauxhall Insigna (2008-2017 / Insigna A, MK 1) In order to replace the key shell of the Opel Insignia, you need to pry with an object in the groove that divides the two halves of the remote contro…

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos