Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Opel Insignia B key

Model: Vauxhall Insigna MK 2, Insigna B - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Key

See other generations:
Video tutorial

When the remote control of your Opel Insignia B suddenly stops working, it is important that you know how to replace the battery located inside it. Thanks to the procedure described in our new guide, you will be able to complete the replacement in a few minutes and safely.

First of all, you need to have a new CR2032 battery and a flat screwdriver.

At this point, remove the emergency key from inside the cover and locate the exhausted battery. Immediately after, remove the old battery with the help of the flat screwdriver and replace it with the new one.


Posted on 18 March 2025 by ScegliAuto


Related tutorials

How to Replace the Key Battery in an Opel Insignia
How to Replace the Key Battery in an Opel Insignia
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) Replacing the battery in the remote key of the Opel Insignia is very simple, especially since you do not need to disassemble the entire key to access…
How to Replace the Key Fob Battery on an Opel Insignia
How to Replace the Key Fob Battery on an Opel Insignia
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) These brief and simple steps will allow you to disassemble and replace the battery of the key fob for the Opel Insignia. First, take your key fob and…
How to Replace the Remote Key Battery on the Opel Insignia B (2018)
How to Replace the Remote Key Battery on the Opel Insignia B (2018)
Vauxhall Insigna (2017-2026 / MK 2, Insigna B) Today, you will learn how to disassemble and replace the battery in the electronic key remote for an Opel Insignia B, second generation, from 2018. F…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos