Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the inspection light on the Opel Insignia.

Model: Vauxhall Insigna MK 1, Insigna A - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Service warning light

See other generations:
Video tutorial

In the following article, we will discuss how to reset the oil warning light as well as the maintenance light on the Opel Insignia. We recommend performing this operation only after having the vehicle serviced.

To reset the warning light, first, turn on the instrument panel. Then, press the up or down navigation button located on the right side of the steering wheel until you find the oil warning light.

Once located, press the right arrow button to open the reset menu. Now confirm by pressing the OK button and confirm again.

The computer will now perform the reset, and the procedure will be complete. Finally, restart the instrument panel to check that the procedure has been completed correctly and that the warning light has been reset.


Posted on 15 December 2025 by ScegliAuto


Related tutorials

How to reset the Service light on the Opel Insignia?
How to reset the Service light on the Opel Insignia?
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) To reset the Service light on the Opel Insignia, connect a diagnostic tool to the vehicle's OBD port. Once connected, select the car model and corres…
How to reset the tyre pressure warning light on the Opel Insignia?
How to reset the tyre pressure warning light on the Opel Insignia?
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) To reset the tyre pressure warning light on the Opel Insignia, inflate the tyres until they reach the optimal pressure value: this value is indicated…
Guide to Resetting the AdBlue Warning Light on the Opel Insignia
Guide to Resetting the AdBlue Warning Light on the Opel Insignia
Vauxhall Insigna (2017-2026 / MK 2, Insigna B) This guide provides the main instructions to reset the AdBlue warning light on the Opel Insignia. Before performing the reset, ensure you have topped…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos