Do it yourself
Frequently asked questions about cars and motorcycles

How to check the AdBlue level of the 2020 Opel Vivaro.

Model: Vauxhall Vivaro Vivaro C, MK 3 - Years 2019-2026
Part: Onboard computer

Today we will see how to check the AdBlue level in the tank of the 2020 Opel Vivaro. To check the fluid level, we need to turn on the instrument panel and press the SET button for a few seconds, which is located below the display of the panel. Among the various settings, it will be possible to view the AdBlue level. If the level is average or above the mark, the warning light will not activate after the check; however, if the level is close to the lower mark, the light will activate after a few days, and it will be necessary to top up the fluid. It is important to keep an eye on the fluid level to avoid the warning light activating in situations where we cannot immediately top up.

Posted on 22 December 2025 by ScegliAuto

Video tutorial

Related tutorials

Vauxhall Vivaro (2019-2026 / Vivaro C, MK 3) In this guide, we will see the main steps that will allow us to reset the warning light for topping up the AdBlue liquid in the Opel Vivaro. Before r…
Vauxhall Vivaro (2014-2019 / MK 2) Today we will discover the instructions that will allow us to top up the AdBlue liquid, consequently resetting the message on the display of the Opel…
Vauxhall Vivaro (2019-2026 / Vivaro C, MK 3) These short and simple instructions will show us how to reset the AdBlue fluid top-up warning on the Opel Vivaro. First of all, we get into the vehic…

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos