Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Timing Belts of an Opel Insignia

Model: Vauxhall Insigna MK 1, Insigna A - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Timing belt

See other generations:
Video tutorial

How to remove the timing belts of an Opel Insignia? Lift the car on a column lift or jack (if necessary, remove the front wheel using a screwdriver to detach the right wheel arch liner). Once these steps are completed, lift the bonnet, remove the engine soundproofing panel and the timing belt cover (metal).

Use a suitable spanner to loosen the tensioner pulley and slide the belt off its seat. Use a socket wrench to unscrew the securing bolt of the tensioner pulley, then remove the water pump as shown in the video.

Fit the new water pump (previously removed), the tensioner, and the belt itself, tightening everything with the socket wrench.


Updated on 8 March 2026 by ScegliAuto


Related tutorials

Replacing the Timing Belt on the Opel Insignia 2.0 CDTI
Replacing the Timing Belt on the Opel Insignia 2.0 CDTI
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) Here are the instructions for removing and replacing the timing belt on the Opel Insignia 2.0 CDTI. First, open the bonnet and remove the timing belt…
How to Replace the Timing Belt in an Opel Insignia
How to Replace the Timing Belt in an Opel Insignia
Vauxhall Insigna (2017-2026 / MK 2, Insigna B) To replace the timing belt in an Opel Insignia, turn off the engine and disconnect the battery. Remove any plastic engine covers and accessory pulley…
Replacement of the timing belt of the Opel Insignia 2.0 CDTI
Replacement of the timing belt of the Opel Insignia 2.0 CDTI
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) In this guide we will see the steps that will allow us to disassemble and replace the timing belt of the Opel Insignia 2.0 CDTI. First of all, we ope…

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos