Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Oil Pump Seal on the Opel Insignia?

Model: Vauxhall Insigna MK 1, Insigna A - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Pump

See other generations:
Video tutorial

To replace the oil pump seal on the Opel Insignia, access the underside of the car and remove the oil pump protection panel. Next, unscrew the bolts securing the pump's pipe and pull out the old seal.

Once removed, insert a new replacement seal and reattach the pipe with the bolts. After the pipe is secured, reinstall the oil pump protection plate.


Updated on 19 June 2026 by ScegliAuto


Related tutorials

Causes and Consequences of Low Oil Pressure on an Opel Insignia Engine
Causes and Consequences of Low Oil Pressure on an Opel Insignia Engine
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) In this video, you can see the consequences of low oil pressure on the engine of an Opel Insignia 2.0 with an A20DTH engine. A small rubber seal inst…
Guide to replacing the fuel pump of the Opel Insignia
Guide to replacing the fuel pump of the Opel Insignia
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) The instructions provided in this guide will allow us to disassemble and replace the fuel pump of the Opel Insignia. First, we open the rear doors of…
How to Replace the Fuel Pump in the Opel Insignia
How to Replace the Fuel Pump in the Opel Insignia
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) Below are the instructions for removing and replacing the fuel pump in the Opel Insignia. First, open the rear doors of the vehicle and start by remo…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos