Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to replacing the fuel pump of the Opel Insignia

Model: Vauxhall Insigna MK 1, Insigna A - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Fuel pump

See other generations:
Video tutorial

The instructions provided in this guide will allow us to disassemble and replace the fuel pump of the Opel Insignia. First, we open the rear doors of the car and start disassembling and removing the rear seat; then we remove the cover of the fuel pump, disconnecting the fuel lines and the electrical connector, as shown in the video.

At this point, we unscrew the ring of the pump to remove it from the tank, replacing it with the new original one; we reassemble the fuel pump and finally the rear seat!


Posted on 26 March 2026 by ScegliAuto


Related tutorials

How to Replace the Fuel Pump in the Opel Insignia
How to Replace the Fuel Pump in the Opel Insignia
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) Below are the instructions for removing and replacing the fuel pump in the Opel Insignia. First, open the rear doors of the vehicle and start by remo…
How to Replace the Oil Pump Seal on the Opel Insignia?
How to Replace the Oil Pump Seal on the Opel Insignia?
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) To replace the oil pump seal on the Opel Insignia, access the underside of the car and remove the oil pump protection panel. Next, unscrew the bolts …
Where is the fuel filter located on an Opel Insignia and how to access it?
Where is the fuel filter located on an Opel Insignia and how to access it?
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) Good morning, today you will discover where the diesel filter is located on your Opel Insignia and how to access it. The filter is located inside the…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos