Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Seat of the Opel Insignia?

Model: Vauxhall Insigna MK 1, Insigna A - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Seat

See other generations:
Video tutorial

To remove the rear seat of the Opel Insignia, lift the seat upholstery at both the rear and side: you will find fastening clips that need to be removed to free the seat. Then, lift the seat from the rear to access the clips located at the front of the seats: once these are unfastened, you can completely remove the seats to replace them with a new spare part.


Updated on 6 August 2026 by ScegliAuto


Related tutorials

Guide to replacing the fuel pump of the Opel Insignia
Guide to replacing the fuel pump of the Opel Insignia
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) The instructions provided in this guide will allow us to disassemble and replace the fuel pump of the Opel Insignia. First, we open the rear doors of…
How to Replace the Fuel Pump in the Opel Insignia
How to Replace the Fuel Pump in the Opel Insignia
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) Below are the instructions for removing and replacing the fuel pump in the Opel Insignia. First, open the rear doors of the vehicle and start by remo…
Where is the OBD port of the 2019 Opel Insignia located?
Where is the OBD port of the 2019 Opel Insignia located?
Vauxhall Insigna (2017-2026 / MK 2, Insigna B) To locate the OBD port inside your Opel Insignia second edition (year 2019), you do not need to disassemble any components. All you have to do is car…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos