Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Replace the Water Pump on an Opel Meriva

Model: Vauxhall Meriva Meriva A, MK 1 - Years 2003-2010
Part: Pump

Here’s how to remove and replace the water pump on an Opel Meriva. Lift the front bonnet and remove the engine soundproofing panel. Use a spanner to loosen the tensioner pulley and slide the belt off its seat. Using a socket wrench, unscrew the fastening bolt of the tensioner pulley and remove the water pump to be replaced. Install the new water pump, the tensioner, and the belt, tightening everything with the socket wrench. Finally, reinstall the fastening bolts of the splash guard and refit the wheel with the tyre on the vehicle.

Updated on 9 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing Water Pump from Opel Meriva
Removing Water Pump from Opel Meriva
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) In this video tutorial, you will learn how to remove the water pump from an Opel Meriva. To access the pump, you need to remove the front right wheel…
How to Remove and Replace the Timing Belt on Opel Meriva
How to Remove and Replace the Timing Belt on Opel Meriva
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) In this guide, learn how to remove and replace the timing belt on an Opel Meriva. Lift the car on a column lift and remove the right front wheel. The…
How to Replace the Water Pump on an Opel Meriva B
How to Replace the Water Pump on an Opel Meriva B
Vauxhall Meriva (2010-2017 / MK 2, Meriva B) In this video tutorial, see how to replace the water pump on an Opel Meriva B by following these simple steps: First, disconnect the battery cables t…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos