Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Water Pump on an Opel Meriva B

Model: Vauxhall Meriva Meriva B, MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Pump

See other generations:
Video tutorial

In this video tutorial, see how to replace the water pump on an Opel Meriva B by following these simple steps: First, disconnect the battery cables to avoid short circuits. Next, drain the coolant; the cap is located under the radiator.

Remove the air filter housing and its respective pipes. Place a jack under the engine for support; unscrew the engine block under the air filter housing.

Unscrew the pin accordingly, lift the pulley, and remove the Poly-V belt. Unscrew the pump and thermostat, taking care with the pump screws as they have different lengths.

Reassemble everything in reverse order.


Updated on 28 June 2026 by ScegliAuto


Related tutorials

How to Remove and Replace the Water Pump on an Opel Meriva
How to Remove and Replace the Water Pump on an Opel Meriva
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) Here’s how to remove and replace the water pump on an Opel Meriva. Lift the front bonnet and remove the engine soundproofing panel. Use a spanner to …
How to Remove and Replace the Timing Belt on Opel Meriva
How to Remove and Replace the Timing Belt on Opel Meriva
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) In this guide, learn how to remove and replace the timing belt on an Opel Meriva. Lift the car on a column lift and remove the right front wheel. The…
Removing Water Pump from Opel Meriva
Removing Water Pump from Opel Meriva
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) In this video tutorial, you will learn how to remove the water pump from an Opel Meriva. To access the pump, you need to remove the front right wheel…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos