Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Water Pump from Opel Meriva

Model: Vauxhall Meriva Meriva A, MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Pump

See other generations:
Video tutorial

In this video tutorial, you will learn how to remove the water pump from an Opel Meriva. To access the pump, you need to remove the front right wheel: lift the car and remove its bolts.

Next, disconnect the connector found in the intake hose and remove the screws from the duct to take it off: then detach the airbox by releasing it from the lever. Loosen the tensioner to remove the belt and then take off the pulley to which the water pump is attached: unscrew the support screws and replace it with the new one!


Updated on 28 March 2026 by ScegliAuto


Related tutorials

How to Remove and Replace the Water Pump on an Opel Meriva
How to Remove and Replace the Water Pump on an Opel Meriva
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) Here’s how to remove and replace the water pump on an Opel Meriva. Lift the front bonnet and remove the engine soundproofing panel. Use a spanner to …
How to Replace the Water Pump on an Opel Meriva B
How to Replace the Water Pump on an Opel Meriva B
Vauxhall Meriva (2010-2017 / Meriva B, MK 2) In this video tutorial, see how to replace the water pump on an Opel Meriva B by following these simple steps: First, disconnect the battery cables t…
How to Remove and Replace the Timing Belt on Opel Meriva
How to Remove and Replace the Timing Belt on Opel Meriva
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) In this guide, learn how to remove and replace the timing belt on an Opel Meriva. Lift the car on a column lift and remove the right front wheel. The…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos