Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Right Rear Door Panel on Opel Zafira

Model: Vauxhall Zafira Zafira A, T98, MK 1 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Door trim panel

See other generations:
Video tutorial

To remove the right rear door panel on Opel Zafira (first series), follow these steps: disconnect the battery terminals located in the engine bay, use a screwdriver to unscrew the screws in the handle and remove the window switch panel. Next, remove the trim plastic near the lever.

Unscrew the remaining screws on the door panel and detach the retaining clips. Finally, pull the panel away with your hands and unclip it from the door (disconnect the wiring harness and the opening cable).

Reassemble everything in reverse order.


Updated on 9 March 2026 by ScegliAuto


Related tutorials

Disassembly of the rear door panel of the Opel Zafira.
Disassembly of the rear door panel of the Opel Zafira.
Vauxhall Zafira (2005-2011 / MK 2, A05, Zafira B) In a few simple steps, we will see the process of disassembling and replacing the rear door panel of the Opel Zafira. First, we open the rear door of…
How to Remove the Rear Door Panel of the Zafira
How to Remove the Rear Door Panel of the Zafira
Vauxhall Zafira (1999-2005 / Zafira A, T98, MK 1) Remove the door panel of the Opel Zafira? Let's see how to disassemble the panel. Remove the screw cover from inside the internal handle, unscrew the…
Remove the Rear Door Panel on an Opel Zafira
Remove the Rear Door Panel on an Opel Zafira
Vauxhall Zafira (2011-2019 / Zafira C, MK 3) How to remove the left rear door panel of an Opel Zafira? Follow this video to proceed. Before starting the disassembly, disconnect the battery termi…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos