Do it yourself
Frequently asked questions about cars and motorcycles

Vauxhall Mokka: How to Replace and Program the Tyre Pressure Sensor

Model: Vauxhall Mokka Mokka A - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Tire pressure warning light

See other generations:
Video tutorial

The video on the Vauxhall Mokka shows how to eliminate the tyre pressure warning light by correctly replacing and programming a faulty TPMS sensor. The operator uses a dedicated i-sensor tool: first, approach each wheel to read the codes of the functioning sensors and identify the faulty one. Next, remove the affected wheel, deflate it, and work on the tyre changer until the rim is free; at this point, remove the old sensor-valve and install the new programmable sensor.

In the van, connect the new valve body to the TPMS tool and clone the code by copying the data from the original sensor. Once the tyre is remounted on the rim, reinstall the wheel on the Mokka and inflate it to the correct pressure.

Finally, connect the tool to the car as shown in the video to complete the sensor learning; check the instrument panel, and the tyre pressure warning light should be off on the Vauxhall Mokka.


Posted on 16 May 2026 by ScegliAuto


Related tutorials

Vauxhall Mokka (2020-2026 / Mokka B) The tyre pressure warning light in the Opel Mokka 2 can be reset through the infotainment display. If you follow the video provided, you can learn ho…
Vauxhall Mokka (2020-2026 / Mokka B) The TPMS light comes on in a 2021 Opel Mokka when it's time to check the tyre pressure. After adjusting the tyre pressures according to the manufactu…
Vauxhall Mokka (2012-2019 / Mokka A) To reset the low tyre pressure warning light, follow these steps: First, check that the tyre pressures are within the recommended values for the vehi…

Other guides you may be interested in

How to Open the Fuel Flap on a Volkswagen Tiguan?

To open the fuel flap on a Volkswagen Tiguan, first unlock the car using the appropriate button on the remote. This will open the car and unlock the mechanism that controls the fuel flap. At this point, apply light pressure to the left side of the flap to open it and access the cap underneath. Once this is unscrewed, you can refuel and then close everything.

Watch the video!


by ScegliAuto

More videos