Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Zafira
    4. : How to remove the petrol filter on an Opel Zafira

Vauxhall Zafira - Video tutorial

Model: Vauxhall Zafira Zafira B, A05, MK 2 - Years 2005-2011
Part: Petrol filter
Operation: How to remove the petrol filter on an Opel Zafira

Let's see how to remove the petrol filter on an Opel Zafira. We lift the car on a column bridge, we identify the diesel filter (as in the video). With a socket wrench we unscrew the locking pins located near the holding plate (disconnect the cables and the various tubes from the filter) where the petrol filter is located. Once the filter has been removed, remove it from the car (replace it with a new filter). Finally we reassemble the filter to the attached metal holding plate (we connect pipes and cables) and tighten the appropriate pins. We close the front hood at the end of assembly.


Posted on 17 November 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Zafira 1999-2005 - Where is the fuel filter located in the Opel Zafira 1.8? Read Answer
    • Zafira 2005-2011 - Where is the petrol filter located in the Opel Zafira? Read Answer
    • Zafira 2005-2011 - Where is the fuel filter on the Opel Zafira located? Read Answer
    • Zafira 2011-2019 - Where is the fuel filter of the Opel Zafira C located? Read Answer
    • Zafira 2011-2019 - What is the location of the fuel filter on the Opel Zafira? Read Answer
    • Zafira 2011-2019 - Where is the fuel filter of the Opel Zafira Tourer located? Read Answer
    • Zafira 2011-2019 - Where is the petrol filter in Opel Zafira? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos