Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Corsa
    4. : How to remove the fuel filter on an Opel Corsa

Vauxhall Corsa - Video tutorial

Model: Vauxhall Corsa Corsa C - Years 2000-2006
Part: Petrol filter
Operation: How to remove the fuel filter on an Opel Corsa

Let's see how to remove the fuel filter on an Opel Corsa. We lift the car on a column bridge, we identify the fuel filter (as in the video). With a socket wrench we unscrew the locking pins located near the container (disconnect the cables and the various tubes from the filter) where the fuel filter is located. Once the filter has been disassembled, remove it from the car (replace it with a new filter). Finally we reassemble the filter to the attached plate, filter holder belt (we connect pipes and cables) and tighten the appropriate pins. We close the front hood at the end of the assembly.


Posted on 19 November 2023 by ScegliAuto

    Frequently Asked Questions

    • Corsa 2014-2019 - Where is the fuel filter located on Opel Corsa E? Read Answer
    • Corsa 2006-2014 - Where is the fuel filter on the Opel Corsa D located? Read Answer
    • Corsa 2006-2014 - Where is the petrol filter located in an Opel Corsa? Read Answer
    • Corsa 2006-2014 - Where is the petrol filter on the 2010 Opel Corsa D 1.2? Read Answer
    • Corsa 1993-2000 - Where is the petrol filter of the Opel Corsa B located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos