Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Corsa
    4. : Replace fuel filter on Opel Corsa

Vauxhall Corsa - Video tutorial

Model: Vauxhall Corsa Corsa C - Years 2000-2006
Part: Petrol filter
Operation: Replace fuel filter on Opel Corsa

Does the fuel filter of an Opel Corsa need to be replaced? Let's see how it disassembles under the car. We lift the car on a column bridge, we identify the fuel filter as in the video. Unscrew the tightening screw above the metal plate that holds the filter (disconnect the cables and the various tubes from the filter) where the fuel filter is located. We unscrew the filter container. Once the filter has been removed, remove it from the car (replace it with a new filter). We mount the new filter under the car floor (we connect pipes and cables) and we tighten the screw to the holding plate.


Posted on 8 December 2023 by ScegliAuto

    Frequently Asked Questions

    • Corsa 2014-2019 - Where is the fuel filter located on Opel Corsa E? Read Answer
    • Corsa 2006-2014 - Where is the fuel filter on the Opel Corsa D located? Read Answer
    • Corsa 2006-2014 - Where is the petrol filter located in an Opel Corsa? Read Answer
    • Corsa 2006-2014 - Where is the petrol filter on the 2010 Opel Corsa D 1.2? Read Answer
    • Corsa 1993-2000 - Where is the petrol filter of the Opel Corsa B located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos