Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel on an Opel Combo

Model: Vauxhall Combo MK 2, Combo B - Years 1994-2001
Part: Door trim panel

How to remove the door panel on an Opel Combo? Do not worry, follow these steps for disassembly. Before starting the disassembly work, disconnect the battery terminals located in the engine bay. Use a lever to remove the window switch panel, then use a screwdriver to unscrew the securing screws on the plastic panel. Once all screws are removed, use the lever to detach the plastic at the corner of the window. Pull off the door panel by hand, disconnect any power terminals and release cables. Carry out the necessary maintenance inside the door.

Updated on 12 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the front door panel of the Opel Combo
How to disassemble the front door panel of the Opel Combo
Vauxhall Combo (2001-2011 / Combo C, MK 3) Following these brief steps, we will see how to disassemble and replace the front door panel of the Opel Combo. First of all, we open the front door …
How to Remove the Door Panel and Window Handle on an Opel Combo
Vauxhall Combo (2001-2011 / Combo C, MK 3) Below are the instructions necessary to remove and replace the door panel and window handle on an Opel Combo. First, open the front door and start by…
Where is the fuse box of the Opel Combo E located?
Where is the fuse box of the Opel Combo E located?
Vauxhall Combo (2019-2026 / Combo E, MK 5) If you are looking for the fuse box inside your Opel Combo E, all you have to do is carefully read the procedure described in the following guide and…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos