Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Key Cover on an Opel Key

Model: Vauxhall Opel Various
Part: Key

The method described here for changing the cover of an Opel key is valid for models with a flip key produced from 2005 to mid-2009, such as Corsa, Astra, Vectra, Zafira, and Insignia. You can find it on Amazon (2 buttons) under code B0C5R8ZMGF for £9.95, with free delivery for Prime customers. On the back of the key, open the cover and remove the battery, then separate the two halves, keeping in mind that the original shell in the centre is glued, so be careful. Extract the circuit: to use your key, you need to remove the pin that holds the blade in the old mechanism by gently tapping the punch to extract the pin. The new shell has a spring for the snap mechanism. To load it, insert the original blade with the spring tab hooked into the designated slot. Rotate the blade counterclockwise for 2 turns to load the spring. Position the circuit in the new shell, ensuring that the pressure points align. Join the two halves of the shell without the need for glue. Insert the new battery, close the cover, and screw in the only screw present. Check the operation.

Posted on 18 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Vauxhall Opel Various In this video, we can see how to replace the key cover of an Opel/Vauxhall: we can easily get the new cover on any e-commerce website, we just need t…
Vauxhall Opel Various In this video, we can see how to change the damaged shell of the remote control of an Opel car; in general, it works the same way on all models: Here…
Vauxhall Opel Various In this tutorial, you will see how to replace the remote cover of an Opel, a very simple and quick operation. For this, you will need a flathead scre…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos